Electromagnetic Induction Heating Main Circuit Boards :3 kinds based on single-sided or double sided PCB, 1P or 3P input power:

1. 2kw, 3.5kw and 5kw of 220v-1p: single-sided PCB, with aluminium sink, without display.

2. 2kw, 3.5kw, 5kw and 8kw of 220v-1p : Double-sided PCB, with aluminium sink and display.

3. 3kw to 120kw of 380v-3p : Double-sided PCB, with display, without aluminium sink . (PS. The input power can be changed to 3phases of 220v, 440v according to the request from users.)

All 220v-1p main circuit boards from Hitfar have already been fitted on the aluminium sink as a whole, so it can work as a completed set if attached to a proper induction coil. We can install it into a steel container or aluminium container as a whole too.

2kw, 3.5kw, 5kw of 220v-1p Electromagnetic Induction Heating Main Circuit Board: Single-sided PCB

• With aluminium sink

• Without display

2kw, 3.5kw, 5kw and 8kw of 220v-1p Electromagnetic Induction Heating Main Circuit Board: Double-sided PCB

• with aluminium sink

• with display

• PID interface

• Can be added software connect to PLC (Modbus)

All 380v-3p, 3kw to 15kw Electromagnetic Induction Heating Main Circuit Board, single tube IGBT or IGBT module ones, have already been fitted on the aluminium sink as a whole, so it can work as a completed set if connecting to the display and a proper induction coil. We've already made standard steel boxes to contain the whole inside.

3kw to 8kw of 380v-3p Electromagnetic Induction Heating Main Circuit Board [ IGBT single tube: single IGBT]

6kw to 15kw of 380v-3p Electromagnetic Induction Heating Main Circuit Board [ IGBT module: double IGBTs conbined ]

• Double-sided PCB

• With aluminium sink

• with display

• PID interface

• Can be added software connect to PLC (Modbus)

The whole set of 20kw to 120kw Electromagnetic Induction Heating Main Circuit Boards, half bridge or full bridge, are only including the main circuit board itself, digital display, small supporting boards and electronics parts for installation. But seperate with aluminium sink and IGBTs and capacitors etc. It need assembing all spart parts together. We have 2types of steel boxes for assembling: wall-mounted type and standing cabinet for you free choice. The standing cabinet will be installed with temperature controller and thermocouple sensor, A/V meters. Of course, you can make your own containers as well. The input power of 3 phases electromagnetic induction heater can be customized of 220v, 440v according to the request from users.

20kw to 30kw of 380v-3p Electromagnetic Induction Heating Main Circuit Board: Half Brdige

30kw to 120kw of 380v-3p Electromagnetic Induction Heating Main Circuit Board

• Double-sided PCB

• with display

• PID interface

• + Seperate with IGBT(module: double IGBTs conbined together)

• + Seperate with aluminium sink

• Can be ordered with software connect to PLC (Modbus)